| MODEL |
EGX-30 |
| TABLE SIZE |
|
12" x 8-1/16" (305mm x 205mm) |
MAX. WORKING
AREA (X x Y x Z) |
|
12" x 8-1/16" (305mm x 205mm) |
| SPINDLE MOTOR |
|
15W (DC Motor) |
| ROTATION SPEED |
|
5,000 - 10,000 rpm |
| FEEDING RATE |
|
118-1/16 in. (X, Y-axis: Max. 3.0 m)/min. (1-15/16 in. (50 mm)/sec.) |
| MECHANICAL RESOLUTION |
|
0.000394 in. (0.01 mm)/step 0.0000492 in.(0.00125 mm)/step ( micro-step
control ) |
| SOFTWARE RESOLUTION |
|
0.01 mm/step |
| POWER CONSUMPTION |
|
0.6A/117V 0.4A/220-230V 0.4A/230-240V |
| ENGRAVING TOOL SIZE |
|
1/8" (3.175mm) diameter |
| INTERFACE |
|
Parallel (in compliance with the specification of Centronics)
Serial (under RS-232C standard) Automatic switching) |
| BUFFER SIZE |
|
2KB (expandable to 2MB) |
| DISTANCE ACCURACY |
|
Whichever the greater value of 0.00394 in. (0.1 mm) or 0.5% of moving
distance |
| RIGHT-ANGLE ACCURACY |
|
12-1/16 in.( 0.0394 in.) (1 mm (305 mm)) |
| INSTRUCTION SYSTEM |
|
CAMM-GL II mode 2 |
ACOUSTIC NOISE LEVEL
(W x D x H) |
|
Operation mode: 70 dB (A) or less Standby mode: 40 dB (A) or less
(According to ISO 7779) |
EXTERNAL DIMENSIONS
(W x D x H) |
|
20-1/4" x 19-3/8" x 8-9/16" (513mm x 491mm x 217mm) |
| WEIGHT |
|
34.2 lbs. (15.5 kg) |
ENVIRONMENTAL
REQUIREMENTS |
|
Temperature: 41-104 F (5-40 C)
Humidity: 35% - 75% (non-condensing) |
| ACCESSORIES |
|
Power Cord, Engraving Cutting Tool, Engraving Tool
Holder, Dust Collector Hose & Duct, Diamond Scribe Adapter, Hexagonal screw driver,
Spanner, Hexagonal wrench, Test material, Adhesive sheet for securing material, User's
Manual |