Intuitive SmarTrac™ Interface 

• Designed for intuitive use and easy maintenance. 
• Out of the box, up and running in under 30 minutes. 
• Includes an easy to read quickstart guide. 

• Allows faster setup every time. You get done faster, which means more profit per job, more jobs per week. 
• Quick Test Cut Button makes adjusting for different vinyls easy. 
• Dial adjustment for force and speed lets you adjust "on the fly", no pausing necessary, no LED menu, just turn the dial. 
• Repeat plot button stores last job. Makes it easy to do multiple copies without tying up the computer. 
• Down force is easy to adjust to whatever range of down force you need. 
• Start/Stop button lets you pause job, forward material for inspection, then resume cutting where you left off. 

• Additional easy-to-understand cutter adjustments are displayed on the PC instead of the complex and cryptic LED used on other cutters. 
• Diagnostic tests and test cuts can be performed from the Control Center, which provides detailed step-by-step instructions as you use it. 
• Groups of settings for specific materials can be stored and recalled when needed. The number of groups of settings that can be saved is unlimited. (Most cutters have only 4) 
• The Control Center allows you to scale any job sent to the cutter as needed. 
• The range of downforce (high & low limits) can be set to your preference. Such as a high range for sandblast material (200 gr. to 400 gr.). If all you use is high performance vinyl, you can set a low range (50gr.-120gr.). 
• SmarTrac™ includes a Print Cut Feature used with an optional Print/Cut Alignment tool for cutting around pre-printed images on vinyl. 
• The tagboard cutting feature is used for cutting stencils, diecut labels, and single layer materials (such as magnetic sheeting). 

• Built-in tool tray holds a roll of vinyl, weeding tools, blades, etc. Whatever you need to keep handy is always close at hand.